- Version 0.9.21.0 [22 November 2019]
- Bug fixes
- None.
- Changes
- Sample rate of the recording device can be selected between 12000 Hz and 48000 Hz (default).
- Preview decoding added.
- Late TX start added.
- Bug fixes
- Version 0.9.20.5 [6 November 2019]
- Bug fixes
- Non fatal bug in UPD broadcasting fixed.
- Non fatal bug in the watchdog timer trip fixed.
- Changes
- UDP hartbeat message changed: it now includes the actual JT9 submode.
- Beacon mode added.
- Bug fixes
- Version 0.9.20.4 [30 October 2019]
- Bug fixes
- Bug in decoding of JT9-5 and JT9-10 fixed.
- Changes
- None.
- Bug fixes
- Version 0.9.20.3 [25 October 2019]
- Bug fixes
- Fatal bug fixed that caused the program to crash once in a while during the samplerate conversion.
- Fatal bug fixed that caused the program to hang when transmitting in JT9-5 and JT9-10 modes.
- Changes
- "RR73" option added.
- Right-clicking in the "Band Activity" or "RX Frequency" windows will copy the window content to the clipboard (control+C equivalent).
- Bug fixes
- Version 0.9.20.0 [9 May 2019]
- Bug fixes
- None.
- Changes
- Soundcard sample rate changed from 12000 Hz to 48000 Hz.
- Alert function added (including UDP broadcasting).
- A Front End Mixer added.
- Bug fixes
- Version 0.9.16.0 [18 February 2019]
- Bug fixes
- None.
- Changes
- Multiple decoding added.
- Bug fixes
- Version 0.9.15.0 [28 January 2019]
- Bug fixes
- None.
- Changes
- PSKreporter.org spotting added.
- Flexible frequency boundaries for the spectrum display added (100 - 5000 Hz in 100 Hz steps).
- Bug fixes
- Version 0.9.14.1 [12 January 2019]
- Bug fixes
- None.
- Changes
- Spectrum display adjusting changed.
- Bug fixes
- Version 0.9.14.0 [7 January 2019]
- Bug fixes
- Non fatal bug fixed that skipped PTT handling in the first TX cycle after 'Halt TX' was pressed.
- Changes
- JT9-10 mode added.
- Waterfall speed will adapt to selected JT9 submode.
- Any (reasonable) value can be entered for tone spacing (allowing flexible frequency dividing of the modulated signal).
- Option to discard the audio frequency limits added.
In that case the TX boundaries will be 100 - 4980 Hz regardless of the JT9 submode.
The RX boundaries however will still be limited by the resampling process:
- JT9-1: 100 - 4980 Hz
- JT9-2: 100 - 2240 Hz
- JT9-5: 100 - 840 Hz
- JT9-10: 100 - 415 Hz
- Bug fixes
- Version 0.9.12.5 [26 December 2018]
- Bug fixes
- None.
- Changes
- JT9-5 mode added.
- Bug fixes
- Version 0.9.12.4 [14 December 2018]
- Bug fixes
- Fatal bug fixed that sometimes caused the application to crash at the end of a transmission.
- Changes
- Ability to select double or quadruple tone tone spacing added.
- Ability to display the own transmission in the RX frequency window added.
- Bug fixes
- Version 0.9.12.3 [12 December 2018]
- Bug fixes
- Fatal bug fixed that caused a array bound violation once in a while.
- Changes
- Debug information extended (in particular during TX).
- Bug fixes
- Version 0.9.12.2 [10 December 2018]
- Bug fixes
- None.
- Changes
- Recording of the incoming audio pauzed during transmission or tuning.
- JT9-5 temporaily disabled.
- Debug information extended.
- Bug fixes
- Version 0.9.12.1 [7 December 2018]
- Bug fixes
- None.
- Changes
- Debug information extended.
- Bug fixes
- Version 0.9.11 [22 November 2018]
- Bug fixes
- Fatal bug that could cause a crash if the soundcard was not found fixed.
- Non fatal bug that caused wrong audio frequency limitations for JT9.EXE fixed.
- Non fatal bug that caused a slight timing error fixed.
- Changes
- None.
- Bug fixes
- Version 0.9.10 [20 November 2018]
- Bug fixes
- None.
- Changes
- JT9-2 and JT9-5 parameters changed to the original ones. The slightly slower baudrates make better advance of the transmission cycle. In theory this should improve S/N by 0.46 dB for JT9-2 and 0.74 dB for JT9-5.
Be aware that due to the baudrate changes there is NO BACKWARD COMPATIBILITY for JT9-2 and JT9-5. - JT9-10 mode added (also original parameters).
- JT9-2 and JT9-5 parameters changed to the original ones. The slightly slower baudrates make better advance of the transmission cycle. In theory this should improve S/N by 0.46 dB for JT9-2 and 0.74 dB for JT9-5.
- Bug fixes
- Version 0.9.03 [16 November 2018]
- Bug fixes
- None.
- Changes
- Made the band and RX frequency window "read-only".
- Added a warning that the path/folder must be without spaces to the installation file.
- Added the option to save the decoded messages in a file ("decoded.txt" in the folder "extra").
- Added the option to save some debug information in a file ("debug.txt" in the folder "extra").
- Bug fixes
- Version 0.9.02 [12 November 2018]
- Bug fixes
- Non fatal bug that that corrupted the cycle calculation fixed.
- Changes
- Calculation of the report (dB) corrected for JT9-2 and JT9-5.
- Beta version message changed (ignore option added).
- Bug fixes
- Version 0.9.01 [9 November 2018]
- Bug fixes
- Non fatal bug that limited the maximum audio frequency for JT9-2 and JT9-5 fixed.
- Changes
- Additional information added to the installation file.
- Warnings if case the settings can not be read or written extended.
- Bug fixes
- Version 0.9.00 [8 November 2018]
- First release